Moderators: B17 Moderator, B16 Moderator

By Ruthlessmusic970
#244324
I have seen quite a bit of discussion about making adjustments to the rear toe. Many of you have probably gotten a alignment sheet that looks like mine afterwards. :o
IMG_1197.JPG


The shop was cool and only charged me $50 for the adjustments that they were able to make.
They offered to installed shims for me for $150. Now that I have my readout I was thinking about installing them myself for about $30 with NAPA shims. .3 shim on left and .4 on the right to zero it out. Might even go a little negative instead..

So I'm looking for anyone who has installed shims on a Sentra with rear drums!!?? I have some decent leads on how to do it when there are rotors in the rear, but I would like to see the whole process for the drums.
B16 Spec shift knob

I was checking out the TWM bushings and saw the s[…]

Can you go more into detail about the suspension u[…]

Here are some better shots of the car you found on[…]

or just gut the catalytic converter run a k and n […]