2007-2012
User avatar
By jayson.enriquez
#244204
eXcude wrote:3 days of driving, no CEL no leaks no issues... Just adapting to the new cabin noise. :D

IMG_20170627_171439.jpg

So,2 spacers on the bottom o2 sensors in the header not midpipe?
User avatar
By eXcude
#244205
Ran the car hard today, no CEL's as we stand.

What is this is 'mid-pipe' you speak of?

Look under your car, tell me what you see.

Or don't because then you will feel silly when you notice there are NO O2 SENSORS PAST THE EXHAUST MANIFOLD.

:D
User avatar
By jayson.enriquez
#244206
eXcude wrote:Ran the car hard today, no CEL's as we stand.

What is this is 'mid-pipe' you speak of?

Look under your car, tell me what you see.

Or don't because then you will feel silly when you notice there are NO O2 SENSORS PAST THE EXHAUST MANIFOLD.

:D

Sorry,I'm really confused..Weren't they talking about midpipe in the other forum?

But I think you know your stuff so,I have to go with what you're talking about.
User avatar
By eXcude
#244210
jayson.enriquez wrote:
eXcude wrote:Ran the car hard today, no CEL's as we stand.

What is this is 'mid-pipe' you speak of?

Look under your car, tell me what you see.

Or don't because then you will feel silly when you notice there are NO O2 SENSORS PAST THE EXHAUST MANIFOLD.

:D

Sorry,I'm really confused..Weren't they talking about midpipe in the other forum?

But I think you know your stuff so,I have to go with what you're talking about.


I was talking about the header (exhaust manifold)

Sometimes terms get mixed up, when you say mid-pipe I am guessing you mean after the down pipe. There is a cat and res, no O2 sensors. Those are only in the header, that's it.

Unless I totally mis-understood you :|
User avatar
By eXcude
#244217
jayson.enriquez wrote:http://www.allsentra.com/viewtopic.php?f=87&t=1247


I'm not sure if you have already read this topic before.


I have seen that, I've pretty much read the whole site. haha

I picked up some anti-foulers from another member, no idea what he used them for. He did have a turbo setup. I didn't drill them out and they work like a charm. Mine have a 90 degree angle so they can clear the radiator fan.

You can see them on either side of my header in this pic:
header-not-installed.jpg


If you look closely towards the collector you can see them:
header-installed.jpg
Last edited by eXcude on Wed Jul 05, 2017 2:07 pm, edited 1 time in total.
User avatar
By eXcude
#244218
Also in those pics, I don't think that's a B16 Sentra... that may be the source of your confusion. There is no o2 that far down the exhaust, OEM at least.
Last edited by eXcude on Wed Jul 05, 2017 2:23 pm, edited 1 time in total.
User avatar
By eXcude
#244224
jayson.enriquez wrote:Gotcha..You've been a big help..Thank you


That's what the community is all about, although ours kinda sucks a bit :P

The thread pitch on that bung is M18x1.5 FYI.
User avatar
By eXcude
#244342
No video yet, too much normal life stuff going on. This is all I got, another lame pic with my shitty phone.

July2017-Shot.jpg
User avatar
By eXcude
#244372
jayson.enriquez wrote:So shiny sir...Love the black rims


yogib777 wrote:looks stealth fighter good
it's all coming together as it should


if-en you have a nitrous need
i have an NX set that will fit your steed

then it will be up to speed
and be as fast as it looks , indeed


Well I got a Yogi poem, I feel special. Thanks for the nice compliments.

I'm mulling over coilovers for my next change. Cams and a tune are tempting, but not ideal at this point. I would like to swap in the HLSD when the clutch goes, maybe a different flywheel too.

Long term as the engine ages I may look into a rebuild with some JWT parts. Prep it for boost? Who knows, that power may corrupt me :D

For now it's where I want it, now to take care of it and enjoy the ride :hearteyes:
User avatar
By eXcude
#244561
Alright had a chat with the wife and she's alright with me getting some coil-overs next year, gives me plenty of opportunity to wait for a nice deal to come along :D

So here are some pics of the latest stance, new 5mm spacer up front and 'custom' center caps installed finally:

front.jpg

Side.jpg

rear.jpg

caps.jpg
User avatar
By eXcude
#244562
Cock blocked by attachment limitations:

spacer.jpg

front-stance.jpg

rear-stance.jpg
User avatar
By eXcude
#244567
Nope I was totally shocked at her response, 'Yes,' with some reasonable conditions.

Also I officially own my Sentra today :D

Paid off the car loan for this thing in 16 months!
  • 1
  • 10
  • 11
  • 12
  • 13
  • 14
ALLSENTRA.COM decal/sticker

We do have an official AllSentra decal that's been[…]

Used ye olde nite ize tool there to put my license[…]

How have the stock engine internals endured @9psi […]

How to install rocker moldings

Should be very easy, just some clips I believe